Antari HZ-100 Manuel d'utilisateur télécharger pdf (Page 7)

Function

Ground

Data-

Data+

•DMX Operation

The units HZ-300 and HZ-400 have on-board DMX control. These models use 1

channel to control volume output operation. Each channel has a value range of 0 to

255. The DMX channel is set on the rear panel of the HZ-300 and HZ-400 by setting

the dip switches to the desired channel.

If Channel A has a value from 0 to 5, the unit is OFF.

Between the values 6 to 255 the volume of fog output is regulated. With 6 being

the minimum volume of fog produced and 255 approaching the maximum. The

volume output rises as the DMX value is increased.

Note: The controls HC-1 and HCR-1 will be disabled when the hazer is in DMX mode.

•Hazer Liquid

Antari HZL-1 haze liquid was designed for the use with Antari hazers HZ-100, HZ-300,

and HZ-400. Antari HZL-1 is a non-toxic solution that produces a pure, translucent haze

with extremely long hang time and low moisture, perfect for HZ-100, HZ-300 and

HZ-400.

Important: Never mix oil-based and water-based hazer liquids. Before switching the

kind of hazer liquid in use, completely drain the hazer’s tank to avoid mixing.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Pas de commentaire

Antari HZ-100 Manuel d'utilisateur Page 7